updates

lab2/verilog/z710/clock_control.v

@@ -1,46 +1,25 @@
 `timescale 1ns / 1ps
-//////////////////////////////////////////////////////////////////////////////////
+// fpga4student.com: FPGA projects, VHDL projects, Verilog projects
-// Company: 
+// Verilog project: Verilog code for clock divider on FPGA
-// Engineer: 
+// Top level Verilog code for clock divider on FPGA
-// 
-// Create Date: 2023/11/29 15:52:55
-// Design Name: 
-// Module Name: clock_control
-// Project Name: 
-// Target Devices: 
-// Tool Versions: 
-// Description: 
-// 
-// Dependencies: 
-// 
-// Revision:
-// Revision 0.01 - File Created
-// Additional Comments:
-// 
-//////////////////////////////////////////////////////////////////////////////////
-
-
 module clock_control(
-    input clk_in,
+    input clock_in,
     input enable_clk,
-    output clk_out
+    output reg clock_out
-    );
+);
-    
+    reg[3:0] counter = 4'd0;
-    // if clock is divided
+    parameter DIVISOR = 4'd5;
-    localparam clk_div = 2; // clock is diveded by half of divisor
+    // The frequency of the output clk_out
-    reg [3:0] cnt = 4'd0;
+    //  = The frequency of the input clk_in divided by DIVISOR
-    reg out = 1'b0;
+    // For example: Fclk_in = 50Mhz, if you want to get 1Hz signal to blink LEDs
-    always @(posedge clk_in) begin 
+    // You will modify the DIVISOR parameter value to 28'd50.000.000
-        cnt <= cnt + 4'd1;
+    // Then the frequency of the output clk_out = 50Mhz/50.000.000 = 1Hz
-        if (cnt >= (clk_div - 1)) begin
+    always @(posedge clock_in)
-            out <= ~out;
+    begin
-            cnt <= 0;
+        counter <= counter + 4'd1;
+        if(counter>=(DIVISOR-1)) begin
+            counter <= 4'd0;
         end
+        clock_out <= ((counter<DIVISOR/2)?1'b1:1'b0) && enable_clk;
     end
-    assign clk_out = out & enable_clk;
-    
-    
-    // original clock
-//    assign clk_out = clk_in & enable_clk;
-    
 endmodule